current location£ºHome / Production / Dewaxing Autoclave
Automatic Dewaxing Autoclave



Dewaxing Autoclave is special designed for removing the wax patterns in the ceramic shell. 


Features

• Integrated Chambers

  Designed as integration with the steam generator and dewaxing chamber to save space. 

  The dewaxing chamber is always under a high temperature condition with a short pressure balance time between 

  the double chambers when the high-temperature steam enters into inner side, and also decreasing moisture 

  content in the drained wax.

• Advanced Control

  With PLC control system to ensure the logical interlock of temperature, pressure, water level, steam in, dwell, 

  steam out and door operation can be controlled automatically except closing/opening door and placing in/out shell clusters.

  And also features with water feeding and stopping automatically, a sound-light alarm for the high-low water level and contactless heating. 

  Heat recovering unit can be supplied for saving energy with additional cost.

• Good Safety Performance

  This machine complies with all the safety regulations of pressure vessel. 

  It features with seven safeguards including temperature safety control, pressure safety control, safety valve protection, no steam delivering without door-closing in place, the 

  door is unable to open if there is any residual pressure in the chamber, no steam in when the inner air release valve opens, residual pressure protection of autoclave door. 

  There is an obvious safety warning board in front of the operating door.

• High-grade Configuration

  The key control components are all imported products or supplied by joint venture. And the key valve is imported from UK.

• Energy saving and environment friendly

  The outside cover of autoclave is made of new thermal insulation material with a lower heat-contacting coefficient, good thermal barrier effect and decreasing the fuel 

  consumption.

• Attractive Appearance

  Besides the quality, we also pay special attention to the appearance design and surface treatment for our machines with the characters of reasonable process, advanced 

  technology, beautiful appearance and fluent colors.


Specifications

Model
YT-DRTF1000
YT-DRTF1200
YT-DRTF1400
YT-DRTF2300
Inside Dimension
¦µ1000¡Á1200mm
¦µ1200¡Á1500mm
¦µ1400¡Á1600mm
¦µ2300¡Á2000mm
Inside Material
Carbon steel or SS304/316L
Carbon steel or SS304/316L
Carbon steel or SS304/316L
Carbon steel or SS304/316L
Design Temperature
183.2 ¡æ
183.2 ¡æ
183.2 ¡æ
183.2 ¡æ
Design  Pressure
1.0 MPa
1.0 MPa
1.0 MPa
1.0 MPa
Dwell Time
0¡«60min (adjustable)
0¡«60min (adjustable)
0¡«60min (adjustable)
0¡«60min (adjustable)

Note: We can design the special machines according to the customer¡¯s requirements.

         The Automatic Dewaxing Autoclave can fit with an Energy Recovery System with additional cost to save energy.


Qinhuangdao Yutian Investment Casting Equipment Co., Ltd.